MEYER SPREADERS - INSERT HOPPER - Wiss and Wiss Equipment

Base Line 600 Insert Spreaders

The Meyer Base Line insert hopper spreader is offered for professionals that want an all-season spreader at an economical price. The Meyer BL-600 is made of stainless steel to provide years of reliable service, and its low-profile design allows the driver increased rear window visibility.

Quick Facts:

•Type: Insert Hopper
•Vehicle: Long and short bed pick-up trucks
•Length: 6-feet
•Capacity: 1.5 cu. yd.
•Construction: Stainless Steel

SPECIFICATIONS
Hopper Length	72″
Total Length (in-use):	90″
Hopper Height	34″
Width:	50″
Spread Width (min-max):	3′-30′
Empty Weight:	1,040 lbs.
Max Capacity Load:	1.5 cu. yd.
Max Capacity Weight	4,310 lbs.
Spreading Material:	Sand, Salt Mixed
Operating System:	Briggs/Stratton Gas
Horse Power:	6.5
Mounting Method:	Hold Down Kit Part #62562
Vehicle Application:	1/2 ton Plus
Warranty:	1 Year
Material Movement:	Drag Chain
Hopper Material:	Stainless Steel
Spinner Diameter:	13″
Spinner Material:	Poly
Controller:	In-cab Controller

Even Material Flow
With Meyer’s Material Movement System (MMS) material flows evenly to the spinner allowing an even distribution of material coverage to the ground.

Stay In Control
The 6.5HP Briggs and Stratton motor makes quick work of even the toughest materials, and the in-cab controller, with electric start, mounts in the cab for operator accessibility.

Liquid Pre-Wet System
Want to decrease your salt consumption and reduce the amount of time it takes for the salt to melt the ice and snow on the road? Studies show that by pre-wetting salt prior to spreading can reduce salt consumption by 20 to 30% and reduce the time to achieve bare pavement from 20 hours to 2 hours. Our fully integrated pre-wetting system includes two fifteen-gallon tanks (one for each side of the spreader) and the mounting brackets to install the pre-wet system. Included in the system is cab-mounted variable speed controller for adjusting the output of the liquid. Two variable orifice rubber nozzles are provided to evenly treat granular material as it falls onto the spinner disc.

Tarp Kit
Our tarp kit is designed to prevent additional moisture or debris from being introduced into your PV hopper. The rugged one piece fitted tarp is waterproof and has ultra violet protection for longer life. Durable rubber tarp straps allow quick removal during hopper filling operations. The Tarp Kit includes all parts required to mount on the BL-600 spreader.

Nylon Strap Mounting Kit
Don’t settle for aftermarket nylon straps to mount your spreader to the floor of our truck. Our nylon strap mounting kits are designed to meet the rigorous requirements of harsh winter environments. Our mounting Kit includes four heavy duty 2″ nylon ratcheting straps and hardware to quickly mount your spreader.

Baffle Plates
Meyer’s unique internal/external baffle system is easy to adjust and lets you spread material exactly where you need to put it.

Top Screen
Our no tools required top screen breaks up large clumps of material which can cause damage to the drag chain and reduce performance.

Battery Harness Kit
Eliminate the need for an auxiliary battery. Meyer’s Battery Harness Kit contains all the hardware necessary to utilize the power of your vehicle battery to drive your spreader. Designed to fit all truck sizes.

Sure Flow Vibrator
Having problems getting a steady flow of material to your spinner? Meyer’s Sure Flow Vibrator Kit delivers 200 pounds of force to break up even the most stubborn materials. Included in the kit is everything you need to mount the vibrator to your spreading including all hardware, wiring and a mounting plate.

Six-inch Side Extension
Our 6” tall side extension adds approximately 0.66 cubic yard capacity to the spreader. The spill shield easily bolts together allowing you to add capacity to your BL-600 spreader without any welding.

Inverted Vee
The inverted vee helps prevent material from bridging and slowing down the conveyor.

MODEL	DESCRIPTION	WEIGHT	PRICE
MEY64238	BL600, 6′ length unit, 6.5hp B & S, stainless steel, 1.5 cu/yd ft. hopper, 0.3 capacity, 13″ poly spinner, drag chain, in cab controller (hard wired)	1,040 lbs.	CALL FOR PRICE
Optional Equipment
MEY63938	30 GAL Liquid Pre-Wet System	118 lbs.	$2,674
MEA64246	Tarp Kit	20 lbs.	$277.34
ME62562	Hold Down Kit (4 Rachet Straps)	9 lbs.	$217.65
MEA64240	Baffle Plates	40 lbs.	$241.16
MEA64242	Inverted Vee	40 lbs.	$165.69
MEA64241	Six-Inch Side Extension	41 lbs.	$602.93
MEA64239	Top Screen	40 lbs.	$277.34
ME62565	Battery Harness Kit	1 lb.	$698.52
ME63390	Sure Flow Vibrator	10 lbs.	$323.53
Click Here for Timbren Suspension Enhancement Kits
PRICE DOES NOT INCLUDE SETUP OR SHIPPING – PRICED F.O.B. FACTORY UPDATED 9/23/2017

TOP OF PAGE

PV Insert Spreaders

Meyer’s versatile line of Insert Hopper Spreaders fit most 3/4 to 1-ton heavy duty pickup trucks and shares many of the same rugged, time saving, long-lasting features of our larger MDV series spreaders.

The Meyer PV is available in 7 and 8 foot lengths and has 1.8 and 2.0 cubic yard capacities. All PV’s come standard with many features that others consider add-ons, including standard Drop N Loc top screens and inverted V’s. Hydraulic drive option available.

Fight the Storm with Ease

Meyer’s PV spreader was designed to make dispersing material with your pickup truck a breeze. The gas-powered PV can be controlled without the hassle of wires, or control your electric PV with an in-cab variable speed controller. Either way, you’re able to have full control over your PV from the warmth and comfort of your vehicle.

Key Features:

•Fits most standard 3/4 to 1-ton pickup trucks
•10.5 HP Briggs & Stratton engine is standard
•11 HP Honda engine is available
•Replaceable conveyor floor is easily serviced
•Self-cleaning pintle style conveyor chain minimizes maintenance
•Spread widths from 3 to 30 feet

SPECIFICATIONS
Hopper Length	7 & 8 ft.
Capacity	1.8 & 2.0 cu. yd.
Height	34″
Weight	905 lbs to 955 lbs
Width	50″ & 54″
Operating System	Gas or Hydraulic
Spreading Width	4 to 30 ft.
Material	Sand, Salt, Mixed

MODEL	DESCRIPTION	WEIGHT	PRICE
Mild Steel Hopper
MEY63792	PV-B & S 10.5 hp, includes mild steel hopper, spinner, top screen, inverted vee, 8 ft. hopper length, 2.0 cu. yd., 2-3 GVW Class, Drag Chain Conveyor System	1,040 lbs.	$5,678
Stainless Steel Hopper
MEY63794	PV-B & S, SS, 10.5 HP, includes stainless steel hopper, spinner, top screen, 8 ft. hopper length, 2.0 cu.yd., 2-3 GVW Class, Drag Chain Conveyor System	1,040 lbs.	$6,492
MEY63795	PV-Honda, SS, 11.0 HP, includes stainless steel hopper, spinner, top screen, 8 ft. hopper length, 2.0 cu. yd., 2-3 GVW Class, Drag Chain Conveyor System	1,040 lbs.	$7,829
MEY63808	PV- Central Hyd, includes stainless steel hopper, spinner, top screen, 8 ft. hopper length, 2.0 cu. yd., 2-3 GVW Class, Drag Chain Conveyor System	1,040 lbs.	$6,799
PV – Optional Equipment
ME63924	6″ Side Extension, 1.8 cu yd, 54″ width, 7 ft. hopper length, Carbon Steel	40 lbs.	$572.80
ME63895	6″ Side Extension, 2.0 cu yd, 54″ width, 8 ft. hopper length, Carbon Steel	10 lbs.	$458.82
ME62546	PV Tarp Kit (1.8 & 2.0 cu. yd. models only), 7 ft. or 8 ft. hopper lengths	20 lbs.	$281.18
ME62562	PV Hold Down Kit (4 Rachet Straps), 7 ft. or 8 ft. hopper lengths	lbs.	$217.65
ME62565	PV Vehicle Wire Harness – Eliminates need for 12V Aux. Battery, 7 ft. or 8 ft. hopper lengths	1 lbs.	$698.52
MEY63938	30 Gal. Liquid Pre-Wet System	118 lbs.	$2,673.54
ME63925	6″ side extension, 1.8 cu. yd. for 14 GA. 304 SS only, 54″ width, 7′ hopper length, 0.58 cu. yd.	40 lbs.	$572.80
ME63926	PV-6″ side extension, 2.0 cu. yd. for 14 GA., SS only, 54″ width, 8′ hopper length, 0.66 cu. yd. B&S & Honda	10 lbs.	$619.82
Click Here for Timbren Suspension Enhancement Kits
PRICE DOES NOT INCLUDE SETUP OR SHIPPING – PRICED F.O.B. FACTORY UPDATED 9/23/2017

TOP OF PAGE

Polyhawk Insert Spreader

The Meyer Polyhawk is an 8 foot long Corrosion Resistant Conveyor V-Box Spreader that fits most standard 3/4 to 1-ton pickup truck beds. The one-piece polyethylene hopper has a 2.0 cubic yard capacity and comes with a limited 10-year warranty.

The Polyhawk comes fully assembled (includes top screen) and can be initially installed in 2-3 hours and reinstalled in less than 30 minutes. The stainless steel conveyor assembly resists corrosion and minimizes maintenance. The swing up spinner assembly simplifies clean out and storage.

All these features (and more) provide all the performance of conventional V-Box spreaders with less weight, longer life, and less maintenance.

Fight the Storm with Ease

Key Features:

•Fits most standard 3/4 to 1-ton pickup trucks
•10 HP Briggs & Stratton engine is standard
•11 Honda HP engine is available
•One piece polyethylene hopper is corrosion resistant
•10 year limited warranty

SPECIFICATIONS
Hopper Length	8 ft.
Capacity	2.0 cu.yd.
Height	35″
Weight	850 lbs.
Width	50″
Operating System	Gas
Spreading Width	4 to 30 Ft.
Material	Sand, Salt, Mixed

MODEL	DESCRIPTION	WEIGHT	PRICE
MEY63899	Polyhawk-Gas Engine-Poly Hopper PV-Honda 11.0 hp, includes spinner, top screen, inverted vee, 8′ hopper length, 2.0 cu. yd. capacity, 2-3 GVW Class, Drag Chain Conveyor System	855 lbs.	$7,700
MEY64505	Electric-Poly Hopper PV, includes spinner, top screen, inverted vee, 8′ hopper length, 2.0 cu. yd. capacity, 2-3 GVW Class, Drag Chain Conveyor System	855 lbs.	$7,399
PolyHawk Optional Equipment
ME63422	9″ Spinner Extensions SS – Polyhawk	2 lbs.	$515.31
ME62562	Hold Down Kit (4 Rachet Straps)	9 lbs.	$217.65
ME62565	Vehicle Wiring Harness-Eliminates need for 12V Auxilliary Battery	2 lbs.	$698.52
ME63684	Tarp Kit: Polyhawk Only	15 lbs.	$352.94
ME63390	Vibrator Kit	10 lbs.	$323.53
ME63930	Wireless Controller Package (8′ Poly Elec. Only)	1 lbs.	$558.82
ME66190	Wireless Controller Package (8′ Poly Gas, B&S and Honda Only)	1 lbs.	$822
Click Here for Timbren Suspension Enhancement Kits
PRICE DOES NOT INCLUDE SETUP OR SHIPPING – PRICED F.O.B. FACTORY UPDATED 9/23/2017

Crossfire Insert Spreader

The All-New Insert Hopper with Integrated Pre-Wetting and a 5-Year Warranty. Meyer broke the mold with its new insert spreader, the Crossfire. Not only did we design it with an integrated pre-wetting system, it’s also backed with three to five years of warranty protectionthat’s the best in the industry.
	Why Pre-Wet? Pre-wetting the material speeds up the melting process and reduces how far the granules bounce once they hit the pavement. Pre-wetting can save up to 30% in material usage.
Designed to Protect Your Truck Everything about the Crossfire has been designed to protect your investment. The full-width hopper reduces material spillage into the vehicle bed to help prevent corrosion. The hopper and spinner assembly is constructed from polyethylene to eliminate rust. All mechanical drives are concealed from the elements to keep salt and moisture out and increase service life
	A Delivery System that Saves Time and Money The Crossfire’s electrically-driven delivery system consistently delivers the right amount of material when and where you need it. The hopper screen eliminates large chunks and routes ice-melt to the patent pending tapered-v, while the vibrator helps break up material for even distribution to the full-length auger. The independently controlled spinner manages output to help reduce consumption and lets you precisely spread material exactly where you need it.
Material Output Adjusts to Vehicle’s Speed As your vehicle speed changes, Meyer’s DLX Controller with ground speed control will adjust the flow of material to maintain consistent output. Just set it to the desired material output and the controller regulates consistent flow no matter how fast or slow you are traveling.

MODEL	DESCRIPTION	WEIGHT	PRICE
MEY66263	Crossfire, 6′ Hopper Length, 1.5 cu. yd. capacity, electric drive, 3/4 – 1 ton pickups (Standard Series)	775 lbs.	CALL FOR PRICE
MEY66265	Crossfire, 6′ Hopper Length, 1.5 cu. yd. capacity, electric drive, 3/4 – 1 ton pickups (Deluxe Series)	795 lbs.	$7,305
Crossfire Optional Equipment
ME64759	Crossfire Liquid Pre-Wet System Kit	10 lbs.	$1,292.94
ME64833	Crossfire Work Light (LED)	2 lbs.	$176.46
ME64898	Crossfire Work Light (Halogen)	2 lbs.	$58.81
ME64762	Eight-Inch Side Extension (6′ spreader), .59 cubic yard increase	5 lbs.	$469.41
ME64763	Eight-Inch Side Extension (8′ spreader), .63 cubic yard increase	5 lbs.	$528.24
ME64746	Crossfire Top Screen (6′ spreader)	60 lbs.	$469.41
ME64747	Crossfire Top Screen (8′ spreader)	75 lbs.	$469.41
ME64744	Crossfire Replacement Tarp (6′ spreader)	5 lbs.	$269.41
ME64745	Crossfire Replacement Tarp (6′ spreader)	5 lbs.	$269.41
ME64758	Extended Spinner Assembly	lbs.	$1,175.29
PRICE DOES NOT INCLUDE SETUP OR SHIPPING – PRICED F.O.B. FACTORY UPDATED 9/23/2017

MEYER SPREADERS – INSERT HOPPER

Call for Pricing

Similar Products

WESTFIELD WCX TRANSFER & PITSTOP CONVEYORS

WESTFIELD MKX 160 SERIES GRAIN AUGERS

LUNDELL POLY CUPPED FLIGHTING AUGER

HACKETT RANGER 5/8″ HARROWS

H & S Grinder Mixer

DANUSER PYTHON WIRE ROLLER/UNROLLER

BISON BOX SCRAPERS

BISON MULTIFUNCTIONAL CULTIVATOR