DANUSER PROFESSIONAL SERIES DRIVE UNITS

Model 615-Model 2035

MODEL 615
	2-9/16″ Round Part Number 2″ Hex Part Number Approx. Ship Weight (lbs)			10061 10062 150
Maximum Auger Diameter: Hydraulic Flow: Maximum Hydraulic Pressure: Maximum Hydraulic Back Pressure: Gearbox Ratio:				24″ 6 – 15 GPM 3000 PSI 1500 PSI 4.08:1
	SPEED			TORQUE
	GPM		RPM	PSI	Ft.-lbs.
		6	35	2000	1039
		8	47	2500	1299
		10	59	3000	1558
		12	71
		15	88


MODEL 1025
	2-9/16″ Round Part Number 2″ Hex Part Number Approx. Ship Weight (lbs)			10010 10011 154

Maximum Auger Diameter: Hydraulic Flow: Maximum Hydraulic Pressure: Maximum Hydraulic Back Pressure: Gearbox Ratio:				30″ 10 – 25 GPM 3000 PSI 1500 PSI 4.08:1
	SPEED			TORQUE
	GPM		RPM	PSI	Ft.-lbs.
	10		38	2000	1613
	14		53	2500	2016
	18		68	3000	2419
	20		76
	25		95


MODEL 1530
	2-9/16″ Round Part Number 2″ Hex Part Number Approx. Ship Weight (lbs)			10015 10016 155

Maximum Auger Diameter: Hydraulic Flow: Maximum Hydraulic Pressure: Maximum Hydraulic Back Pressure: Gearbox Ratio:				36″ 15 – 30 GPM 3000 PSI 1500 PSI 4.08:1
	SPEED			TORQUE
	GPM		RPM	PSI	Ft.-lbs.
	15		45	2000	2024
	20		61	2500	2530
	25		76	3000	3036
	30		91


MODEL 2035
	2-9/16″ Round Part Number 2″ Hex Part Number Approx. Ship Weight (lbs)			10020 10021 160

Maximum Auger Diameter: Hydraulic Flow: Maximum Hydraulic Pressure: Maximum Hydraulic Back Pressure: Gearbox Ratio:				36″ 20 – 35 GPM 3000 PSI 1500 PSI 4.08:1
	SPEED			TORQUE
	GPM		RPM	PSI	Ft.-lbs.
	20		47	2000	2597
	25		59	2500	3247
	30		71	3000	3896
	35		83


MODEL MS-615 MODEL MD-615				MS PART NO.	MD PART NO.
	2-9/16″ Round Part Number 2″ Hex Part Number Approx. Ship Weight (lbs)			10063 10064 148	10065 10066 160
Maximum Auger Diameter: Hydraulic Flow: Maximum Hydraulic Pressure: Maximum Hydraulic Back Pressure:				24″ 6 – 15 GPM 3000 PSI 1500 PSI
	SPEED			TORQUE
	GPM		RPM	PSI	Ft.-lbs.
	6		35	2000	1039
	8		47	2500	1299
	10		59	3000	1558
	12		71
	15		88
Click to Enlarge				Click to Enlarge

				MD = Mini Skid-Steer with Double Swivel (Drive unit swivels side-to side as well as front-to back)
MS = Mini Skid-Steer with Single Swivel (Drive unit swivels front-to back)


MODEL MS-1025 MODEL MD-1025				MS PART NO.	MD PART NO.
	2-9/16″ Round Part Number 2″ Hex Part Number Approx. Ship Weight (lbs)			10067 10068 152	10069 10070 164

Maximum Auger Diameter: Hydraulic Flow: Maximum Hydraulic Pressure: Maximum Hydraulic Back Pressure:				30″ 10 – 25 GPM 3000 PSI 1500 PSI
	SPEED			TORQUE
	GPM		RPM	PSI	Ft.-lbs.
	10		38	2000	1613
	14		53	2500	2016
	18		68	3000	2419
	20		76
	25		95
Click to Enlarge				Click to Enlarge

				MD = Mini Skid-Steer with Double Swivel (Drive unit swivels side-to side as well as front-to back)
MS = Mini Skid-Steer with Single Swivel (Drive unit swivels front-to back)


MODEL MS-1530 MODEL MD-1530				MS PART NO.
					MD PART NO.
	2-9/16″ Round Part Number 2″ Hex Part Number Approx. Ship Weight (lbs)			10071 10072 152	10073 10074 164

Maximum Auger Diameter: Hydraulic Flow: Maximum Hydraulic Pressure: Maximum Hydraulic Back Pressure:				36″ 15 – 30 GPM 3000 PSI 1500 PSI
	SPEED			TORQUE
	GPM		RPM	PSI	Ft.-lbs.
	15		45	2000	2024
	20		61	2500	2530
	25		76	3000	3036
	30		91
Click to Enlarge				Click to Enlarge

				MD = Mini Skid-Steer with Double Swivel (Drive unit swivels side-to side as well as front-to back)
MS = Mini Skid-Steer with Single Swivel (Drive unit swivels front-to back)

	MODELS			MODELS			MODELS			MODELS
	615, MS-615, & MD-615			1025 MS-1025 &MD-1025			1530, MS-1530, &MD-1530			2035
PSI	2000	2500	3000	2000	2500	3000	2000	2500	3000	2000	2500	3000		PSI
GPM	SPEED			SPEED			SPEED			SPEED			GPM
	TORQUE (FT.-LBS)			TORQUE (FT.-LBS)			TORQUE (FT.-LBS)			TORQUE (FT.-LBS)
6	35 RPM												6
	1039	1299	1558
8	47 RPM												8
	1039	1299	1558
10	59 RPM			38 RPM									10
	1039	1299	1558	1613	2016	2419
12	71 RPM			46 RPM									12
	1039	1299	1558	1613	2016	2419
14	83 RPM			53 RPM									14
	1039	1299	1558	1613	2016	2419
15	88 RPM			57 RPM			45 RPM						15
	1039	1299	1558	1613	2016	2419	2024	2530	3036
18				68 RPM			54 RPM						18
				1613	2016	2419	2024	2530	3036
20				76 RPM			61 RPM			47 RPM			20
				1613	2016	2419	2024	2530	3036	2597	3247	3896
25				95 RPM			76 RPM			59 RPM			25
				1613	2016	2419	2024	2530	3036	2597	3247	3896
30							91 RPM			71 RPM			30
							2024	2530	3036	2597	3247	3896
35										83 RPM			35
										2597	3247	3896
	Max. Auger Diameter: 24″ Hyd. Flow:6 – 15 GPM Max. Hyd PSI:3000 Max. Hyd. Back PSI: 1500 2-9/16″ Rd. or 2″ HEX			Max. Auger Diameter: 30″ Hyd. Flow:10 – 25 GPM Max. Hyd PSI:3000 Max. Hyd. Back PSI: 1500 2-9/16″ Rd. or 2″ HEX			Max. Auger Diameter: 36″ Hyd. Flow:15 – 30 GPM Max. Hyd PSI:3000 Max. Hyd. Back PSI: 1500 2-9/16″ Rd. or 2″ HEX			Max. Auger Diameter: 36″ Hyd. Flow:20 – 35 GPM Max. Hyd PSI:3000 Max. Hyd. Back PSI: 1500 2-9/16″ Rd. or 2″ HEX
Red areas indicate recommended operating ranges.

MODEL	DESCRIPTION	WEIGHT	PRICE
DA10061	Model 615, 2-9/16″ Rd.	150 lbs.	$1,956
DA10062	Model 615, 2″ Hex	150 lbs.	$1,956
DA10010	Model 1025, 2-9/16″ Rd.	154 lbs.	$1,956
DA10011	Model 1025, 2″ Hex	154 lbs.	$1,956
DA10069	Model MD-1025, 2-9/16″ Rd.	164 lbs.	$1,893
DA10015	Model 1530, 2-9/16″ Rd.	155 lbs.	$2,096
DA10016	Model 1530, 2″ Hex	155 lbs.	$2,096
DA10073	Model MD-1530, 2-9/16″ Rd.	164 lbs.	$1,973
DA10020	Model 2035, 2-9/16″ Rd.	160 lbs.	$2,307
DA10021	Model 2035, 2″ Hex	160 lbs.	$2,307
PRICE DOES NOT INCLUDE SETUP OR SHIPPING – PRICED FOB FACTORY UPDATED 9/1/2018

Mount Options



	SKID-STEER QUICK ATTACH
	Mounting Kit (includes Knuckle and Cradle) attaches Drive Unit to skid-steers with 2-pin system and SAE Standard quick couplers.
		PART NUMBER
	For All PRO Series Drivers	10499
	Approx. Ship Weight (lbs)	150



	SKID-STEER QUICK ATTACH OFFSET W/HARDWARE
	Mounting kit (includes knuckle and cradle) attaches drive unit to skid-steers or front-end loaders with a skid-steer quick attach system.
	Part Number	20656
	Approx. Ship Weight (lbs)	150 LBS.



	EURO QUICK ATTACH OFFSET W/HARDWARE
	Mounting kit (includes knuckle and cradle) attaches drive unit to front-end loaders with a euro quick attach system.
	Part Number	20657
	Approx. Ship Weight (lbs)	150 LBS.



	JD OFFSET QUICK ATTACH MOUNT FOR 200-500 SERIES LOADERS
	Mounting kit (includes knuckle and cradle) attaches drive unit to front-end loaders with John Deere 200-500 quick attach system.
	PART NUMBER	20660
	Approx. Ship Weight (lbs)	166 LBS.

TLB (BACKHOE) & EXCAVATOR
Less dipperstick pin. For dipperstick widths up to 13″. Bucket pin diameters listed below.
BUCKET PIN DIAMETER	WEIGHT (lbs.)	PART NUMBER
1-5/8 inch	50	10296
1-3/4 inch	50	10231
50 mm	50	10232
55 mm	50	10233



SMALLER BACKHOE & MINI-EXCAVATOR
Up to 40 HP. Less dipperstick pin. For dipperstick widths from 3-1/2″ to 8″. Bucket pin diameters listed below.
BUCKET PIN DIAMETER	WEIGHT (lbs.)	PART NUMBER
25 mm	42	10201
1 inch	42	10201
30 mm	42	10202
1-1/4 inch	42	10203
1-3/8 inch	42	10204
35 mm	42	10204
1-1/2 inch	42	10205
40 mm	42	10206
1-5/8 inch	42	10298
1-3/4 inch	46	10207
45 mm	46	10208
50 mm	46	10209



BOLT-ON BUCKET
Mounting Kit (includes Knuckle) will mount on vertical surface. Kit does not include bucket mounting hardware. (4 Bolts 1/2″ Diameter, Grade 5 or greater, 4 lock washers, and 4 nuts)
	WEIGHT (lbs.)	PART NUMBER
	40	10489

MODEL	DESCRIPTION	WEIGHT	PRICE
Skid-Steer Quick Attach
DA10499	Mounting Kit (includes Knuckle and Cradle) attaches Drive Unita to skid-steers with 2-pin system and SAE Standard quick couplers. For all PRO Series Drivers	150 lbs.	$415
DA10499CSE	Mounting Kit (includes Knuckle and Cradle) attaches Drive Units to skid-steers, Fits Case Models 1835B, 1835C, and 1840 For all PRO Series Drivers	150 lbs.	$441
Quick Attach Offset Auger Mounts
DA20656	Skid Steer Quick Attach Plate Offset w/Hardware	150 lbs.	$345
DA20657	Euro Quick Attach Offset w/Hardware	150 lbs.	$370
DA20660	John Deere 200-500 Offset w/Hardware	166 lbs.	$595
MODEL	BUCKET PIN DIAM.	WEIGHT	PRICE
TLB (Backhoe) & Excavator Less dipperstick pin, for dipperstick width up to 13″, bucket pin diameters listed below
DA10296	1-5/8 Inch	49 lbs.	$400
DA10231	1-3/4 Inch	50 lbs.	$400
DA10481	45 mm	50 lbs.	$400
DA10232	50 mm	50 lbs.	$400
DA10233	55 mm	50 lbs.	$400
Smaller Backhoe & Mini-Excavator Less dipperstick pin, for dipperstick widths from 3-1/2″ to 8″. Bucket pin diameters listed below.
DA10201mm	25 mm	42 lbs.	$265
DA10201in	1 inch	42 lbs.	$265
DA10202	30 mm	42 lbs.	$265
DA10203	1-1/4 inch	42 lbs.	$265
DA10204mm	35 mm	42 lbs.	$265
DA10204in	1-3/8 inch	42 lbs.	$265
DA10205	1-1/2 inch	42 lbs.	$265
DA10206	40 mm	42 lbs.	$265
DA10298	1-5/8 inch	42 lbs.	$265
DA10207	1-3/4 inch	46 lbs.	$265
DA10208	45 mm	46 lbs.	$265
DA10209	50 mm	46 lbs.	$265
DA10210	2 inch	46 lbs.	$265
Quick-Attach Mounting Kits
DA10172	Cat 42D & 420E	75 lbs.	$688
DA10173	JCB 208S, 803, & 8018	40 lbs.	$572
DA10174	JD 790ELC	172 lbs.	$1,067
DA10175	JD 135C RTS	82 lbs.	$658
DA20200	JD 35D Mini-Ex (wedge)	60 lbs.	$428
DA20201	JD 50D Mini-Ex (wedge)	60 lbs.	$428
DA10176	Yanmar VIO20 (quick coupler)	45 lbs.	$569
DA20210	Yanmar VIO40/45/50/55 (quick coupler)	43 lbs.	$579
DA10177	Yanmar VIO27/35 (quick coupler)	50 lbs.	$579
DA20007	Kubota KX161-3 & U45	60 lbs.	$428
DA20008	Kubota KX121	60 lbs.	$428
DA20026	Kubota KX057 & U55	60 lbs.	$428
DA20037	Kubota U25	60 lbs.	$428
DA20075	Kubota KX141-3 & U15	60 lbs.	$428
DA20042	Komatsu PC50MR-2	50 lbs.	$428
DA20202	Bobcat X-Change	55 lbs.	$479
DA20258	TAKEUCHI with TAG Style Quick Couplers TB0 35/135/138/175/180/235/240/280/285/290	43 lbs.	$762
DA172918	TAG Pin Grabber Style Quick Coupler	61 lbs.	$579
Bolt-On Bucket
DA10489	Mounting kit (includes knuckle) will mount on vertical surface. Kit does not include bucket mounting hardware	40 lbs.	$260
PRICE DOES NOT INCLUDE SETUP OR SHIPPING – PRICED FOB FACTORY UPDATED 9/1/2018

Hoses & Couplers


HOSES
Hoses are 96″ long with abrasion sleeves. 3/4″ hoses REQUIRED for 20 GPM to 45 GPM.
DESCRIPTION	WEIGHT (lbs.)	PART NUMBER
1/2″ HOSE KIT with flat face ISO couplers	14	10050
3/4″ HOSE KIT with flat face ISO couplers	19	10051
Note: Couplers will not fit Case 1835C, 1838, 1840, & 1845C Skid-Steers.
1/2″ HOSE KIT (includes fittings NOT couplers)	9	10043
3/4″ HOSE KIT (includes fittings NOT couplers)	14	10044

MODEL	DESCRIPTION	WEIGHT	PRICE
DA10047	Cross Port Relief Valve (req’d for pressures exceeding 3000 PSI)	lbs.	$345
Hoses With Flat Face ISO Couplers
DA10050	1/2″ Diameter	14 lbs.	$213
DA10051	3/4″ Diameter	19 lbs.	$295
Hoses With Fittings Not Couplers
DA10043	1/2″ Diameter	9 lbs.	$140
DA10044	3/4″ Diameter	14 lbs.	$222
DA21231	Front-End Loader 25′ X 1/2″ Hose Kit with flat face ISO couplers and pioneer couplers. Mounting bracket included for welding or attaching with “bolts and nuts.” Hardware not included.	18 lbs.	$345
DA21350	Front-End Loader 3/4″ Hose Kit, 25′ Long with flat face ISO couplers and pioneer couplers. Mounting bracket included. Hardware NOT included.	lbs.	$474
Flat Face Couplers
DA10048	Male Hydraulic Coupler 1/2″ ‘O’ Ring Boss(7/8 x 14)	lbs.	$36
DA10049	Female Hydraulic Coupler 1/2″ ‘O’ Ring Boss(7/8 x 14)	lbs.	$58
PRICE DOES NOT INCLUDE SETUP OR SHIPPING – PRICED FOB FACTORY UPDATED 9/1/2018

DANUSER PROFESSIONAL SERIES DRIVE UNITS

Call for Pricing

Similar Products

WESTFIELD WCX TRANSFER & PITSTOP CONVEYORS

WESTFIELD MKX 160 SERIES GRAIN AUGERS

LUNDELL POLY CUPPED FLIGHTING AUGER

HACKETT RANGER 5/8″ HARROWS

H & S Grinder Mixer

DANUSER PYTHON WIRE ROLLER/UNROLLER

BISON BOX SCRAPERS

BISON MULTIFUNCTIONAL CULTIVATOR