| MODEL |
DESCRIPTION |
WEIGHT |
PRICE |
Skid-Steer Mount
**Note: If post/pipe diameter is 4″ O.D. or smaller, PN 21212 must be installed** |
| DA21000 |
Hammer SM40 – Hydraulic continuous chain drive, 300 lb. hammer weight (500 lbs. max.), 40″ stroke, up to 35 strokes per minute, drives t-post up to railroad ties. Integrated post puller to be used with log chain. Include 96″ length hoses with flat face couplers. |
915 lbs. |
$5,377 |
| DA21000L |
Hammer SM40 – Hydraulic continuous chain drive, 300 lb. hammer weight (500 lbs. max.), 40″ stroke, up to 35 strokes per minute, drives t-post up to railroad ties. Integrated post puller to be used with log chain. Include 96″ length hoses with flat face couplers. Loaded with FACTORY INSTALLED additional weight kit |
1115 lbs. |
$5,742 |
| DA21001 |
Hammer SM40 with Grapple – Grapple for one-man operation. |
955 lbs. |
$5,894 |
| DA21001L |
Hammer SM40 with Grapple – Grapple for one-man operation. Loaded with FACTORY INSTALLED additional weight kit |
1155 lbs. |
$6,260 |
| DA21002 |
Hammer SM40 with Tilt – Tilt left or right up to 20 degrees, Includes diverter switch and cigarette lighter adaptor that connects to a power port or cigarette lighter inside the cab. |
1,005 lbs. |
$7,240 |
| DA21002L |
Hammer SM40 with Tilt – Tilt left or right up to 20 degrees, Includes diverter switch and cigarette lighter adaptor that connects to a power port or cigarette lighter inside the cab. Loaded with FACTORY INSTALLED additional weight kit |
1,205 lbs. |
$7,605 |
| DA21003 |
Hammer SM40 with Grapple and Tilt |
1,045 lbs. |
$7,757 |
| DA21003L |
Hammer SM40 with Grapple and Tilt, Loaded with FACTORY INSTALLED additional weight kit |
1,245 lbs. |
$8,123 |
| Optional Wiring Harnesses for Skid-Steer Mount |
| DA21220-1 |
Wiring Harness 8-Pin (Allows tilt function operation from joy stick controls.) Used on ASV, Caterpillar, Komatsu, Terex |
2 lbs. |
$145 |
| DA21220-2 |
Wiring Harness 14-Pin (Allows tilt function operation from joy stick controls.) Used on Bobcat (prior to 1999), Case Kubota, New Holland, Takeuchi, Volvo |
2 lbs. |
$145 |
| DA21220-3 |
Wiring Harness 14-Pin Deere (Allows tilt function operation from joy stick controls.) Used on John Deere |
2 lbs. |
$145 |
| DA21220-4 |
Wiring Harness 14-Pin Caterpillar (Allows tilt function operation from joy stick controls.) Used on Caterpillar |
2 lbs. |
$145 |
| DA21220-5 |
Wiring Harness 14-Pin (Allows tilt function operation from joy stick controls.) Used on Bobcat (1999 and current), Gehl
Bobcat also has a 7-Pin connector on some newer skid steer units that is not available through Danuser, contact your Bobcat dealer for a 7-Pin to 14-Pin adapter. |
2 lbs. |
$145 |
| DA21220-U1 |
Wiring Harness 8-Pin (Allows tilt function operation from joy stick controls.) Universal wiring harness. Contacts are crimped on wire, but not installed in connector. *Requires connector contacts be installed in a switchable +12 V pin location and ground pin location.Mapping of skid-steer connector pins required.* |
2 lbs. |
$145 |
| DA21220-U2 |
Wiring Harness 14-Pin (Allows tilt function operation from joy stick controls.) Universal wiring harness. Contacts are crimped on wire, but not installed in connector. *Requires connector contacts be installed in a switchable +12 V pin location and ground pin location. Mapping of skid-steer connector pins required.* |
2 lbs. |
$145 |
| DA21253 |
Wiring Harness that connects to battery (For use with SM40, LM40, or EM40).
This is NOT a complete harness, it replaces the cigarette lighter adapter |
2 lbs. |
$47 |
| Optional Hose Extension Kit |
| DA186065 |
Hose Extension Kit
Extends Hammer hoses 24″ when needed on certain skid-steers (e.g. JCB, Volvo). Includes two 24″ hoses and fittings. |
3 lbs. |
$53 |
Front-End Loader Mount – Skid Steer Quick Attach
Recommended 75 HP & above tractors. DO NOT exceed the tractor loader Rated Operating Capacity. Use sufficient counterweights.
**Note: If post/pipe diameter is 4″ O.D. or smaller, PN 21212 must be installed.** |
| DA21006 |
Hammer LM40 – Hydraulic continuous chain drive, 300 lb. hammer weight (500 lbs. max.), 40″ stroke, up to 35 strokes per minute, drives t-post up to railroad ties. Integrated post puller to be used with log chain. Includes 96″ length hoses with flat face couplers. See Front-End Hose Kit below for connection to rear tractor remotes. |
946 lbs. |
$5,480 |
| DA21006L |
Hammer LM40 – Hydraulic continuous chain drive, 300 lb. hammer weight (500 lbs. max.), 40″ stroke, up to 35 strokes per minute, drives t-post up to railroad ties. Integrated post puller to be used with log chain. Includes 96″ length hoses with flat face couplers. See Front-End Hose Kit below for connection to rear tractor remotes. Loaded with FACTORY INSTALLED additional weight kit |
1148 lbs. |
$5,846 |
| DA21007 |
Hammer LM40 with Grapple – Grapple for one-man operation. |
986 lbs. |
$5,998 |
| DA21007L |
Hammer LM40 with Grapple – Grapple for one-man operation. Loaded with FACTORY INSTALLED additional weight kit |
1191 lbs. |
$6,363 |
| DA21008 |
Hammer LM40 with Tilt – Tilt left or right up to 20 degrees. Includes diverter switch and cigarette lighter adapter that connects to a power port or cigarette lighter inside the cab. |
1,076 lbs. |
$7,343 |
| DA21008L |
Hammer LM40 with Tilt – Tilt left or right up to 20 degrees. Includes diverter switch and cigarette lighter adapter that connects to a power port or cigarette lighter inside the cab. Loaded with FACTORY INSTALLED additional weight kit |
1,276 lbs. |
$7,709 |
| DA21009 |
Hammer LM40 with Grapple and Tilt |
1,116 lbs. |
$7,861 |
| DA21009L |
Hammer LM40 with Grapple and Tilt, Loaded with FACTORY INSTALLED additional weight kit |
1,316 lbs. |
$8,226 |
| Optional Wiring Harness |
| DA21253 |
Wiring Harness that connects to battery (For use with SM40, LM40, or EM40.)
This is NOT a complete harness, it replaces the cigarette lighter adapter |
lbs. |
$47 |
Front-End Loader Mount-Euro/Global Quick Attach
Recommended 75 HP & above tractors. DO NOT exceed the tractor loader Rated Operating Capacity. Use sufficient counterweights.
**Note: If post/pipe diameter is 4″ O.D. or smaller, PN 21212 must be installed.** |
| DA21010 |
Hammer EM40 – Hydraulic continuous chain drive, 300 lb. hammer weight (500 lbs. max.), 40″ stroke, up to 35 strokes per minute, drives t-post up to railroad ties. Integrated post puller to be used with log chain. Includes 96″ length hoses with flat face couplers. See Front-End Loader Hose Kit below for connection to rear tractor remotes. |
880 lbs. |
$5,558 |
| DA21010L |
Same as above but with 21163 weight kit installed |
1,148 lbs. |
$5,923 |
| DA21011 |
Hammer EM40 with Grapple – Grapple for one-man operation |
920 lbs. |
$6,075 |
| DA21011L |
Same as above but with 21163 weight kit installed |
1,191lbs. |
$6,441 |
| DA21012 |
Hammer EM40 with Tilt – Tilt left or right up to 20 degrees. Includes diverter switch and cigarette lighter adapter that connects to a power port or cigarette lighter inside the cab. |
970 lbs. |
$7,421 |
| DA21012L |
Same as above but with 21163 weight kit installed |
1,191 lbs. |
$7,786 |
| DA21013 |
Hammer EM40 with Grapple and Tilt |
1,010 lbs. |
$7,938 |
| DA21013L |
Same as above but with 21163 weight kit installed |
1,241 lbs. |
$8,304 |
| Optional Wiring Harnesses |
| DA21253 |
Wiring Harness that connects to battery (For use with SM40, LM40, or EM40)
This is NOT a complete harness, it replaces the cigarette lighter adapter |
lbs. |
$46.90 |
| Front-End Loader Hose Kit |
| DA21231 |
Front-End Loader Hose Kit – 1/2″ hose kit, 25′ long, with flat face ISO couplers and pioneer couplers. Mounting bracket included for welding or attaching with “bolts and nuts.” Hardware not included. |
18 lbs. |
$345 |
| DA186065 |
Hose Extension Kit
Extends Hammer hoses 24″ when needed on certain skid-steers (e.g. JCB, Volvo). Includes two 24″ hoses and fittings. |
3 lbs. |
$53 |
Hammer Series Accessories
|
| DA21004 |
SM40 Grapple – May be added to SM40 Hammers Only. Grapple for one-man operation. |
65 lbs. |
$620 |
| DA21014 |
EM40/LM40 Grapple – May be added to EM40 and LM40 Hammers. Grapple for one-man operation. |
65 lbs. |
$620 |
| DA21005 |
SM40 Tilt – May be added to SM40 Hammers Only. Tilt left or right up to 20 degrees. Includes diverter switch and cigarette lighter adapter that connects to a power port or cigarette lighter inside the cab. |
200 lbs. |
$1,995 |
| DA21015 |
LM40 Tilt – May be added to LM40 Hammers Only. Tilt left or right up to 20 degrees. Includes diverter switch and cigarette lighter adapter that connects to a power port or cigarette lighter inside the cab. |
200 lbs. |
$1,995 |
| DA21016 |
EM40 Tilt – May be added to EM40 Hammers Only. Tilt left or right up to 20 degrees. Includes diverter switch and cigarette lighter adapter that connects to a power port or cigarette lighter inside the cab. |
195 lbs. |
$2,170 |
| DA21149 |
T-Post Adapter – Must be added for driving t-posts. |
22 lbs. |
$130 |
| DA21212 |
Plate – Floating Horseshoe – Purchase when driving smaller diameter pipe (less than 4″ O.D.) in difficult conditions. Aids in keeping the post centered in the driver and reduces wear and tear on machine. Does not interfere with operation of the grapple. Works with posts 5″ diameter and smaller including “T” post adapter. |
20 lbs. |
$65 |
| DA21163 |
Additional Weight Kit – Add steel shot for additional driving force (Up to 60% more power.) |
220 lbs. |
$315 |
| DA21278 |
Concrete Breaker Kit – May be added to all Hammer models to convert to a concrete breaker. Breaks up to 9″ thick reinforced concrete. Includes 500 lb. breaker attachment, foot, and additional hardware for assembling. |
534 lbs. |
$1,850 |
| DA21280 |
Plate – Guard Rail – Recommended when driving 6″ or 8″ I beams. Aids in keeping the guards rail from twisting and shifting. Does NOT work with grapple. |
20 lbs. |
$75 |
| DA21395 |
Plate – 5″ Donut – More effective than the Floating Horseshoe Strike Plate in keeping the pipe centered when driving in difficult conditions. Reduces wear and tear on the machine. Makes grappling of pipe more challenging. Works best when using a helper to position pipe in the Hammer. More pipe fencing professionals prefer the 5″ Donut Strike Plate over the Floating Horseshoe Strike Plate. Works with pipe 4.75″ diameter and smaller. Will work with “T” post adapter. |
25 lbs. |
$65 |
PRICE DOES NOT INCLUDE SETUP OR SHIPPING – PRICED FOB FACTORY
UPDATED 9/1/2018 |
