DANUSER POST HOLE DIGGERS - PTO - Wiss and Wiss Equipment

F 8

Fits Category I or II, 3-point hitch 40 HP and up
2 9/16″ round output spindle
Shear-pin protection
Completely guarded PTO driveline
Input and output safety guards

*F 8 SPECS*
AUGERS Diameter(inches)	4,6,9,10,12,14,16,18,24,30
Flighting	Double or Single
Depth(inches)	29,33,40,52
Extensions(inches)	7,14,21
Points	Standard, special & aggressive duty
Cutting Edges	Plain, serrated & Hole Digger Head
MOUNTING	ASAE CategoryIorII 3-point hitch mount
COMPONENTS Gear Set	Spiral bevel (4.125:1)
PTO Assembly (fully guarded)	540 RPM Weasler driveline
Bearings	Timken tapered roller
Seals	Dual-lip, spring-loaded
Spindle Size	2-9/16″ round
Boom (with reinforcing rib)	3-1/2″ O.D. tubing
Yoke	3″ O.D. tubing with CategoryIorIIpins
WARRANTY(gearbox)	Up to 5 year

ITEM #	DESCRIPTION	PART #	WEIGHT	PRICE
F8	Digger, Max. Diameter Auger 30″NOTE: Unit Comes Standard with Both Cat I and Cat II Pins Below	9050	320 lbs.	$3,470
9051	Assembly Hardware Package. Allows crane boom and yoke to be mounted on most ASAE 3-pt. hitch tractors, Category I or II pin size, Category I width only.	9051	9 lbs.	$65
9052	Assembly Hardware Package. Allows crane boom and yoke to be mounted on most ASAE 3-pt. hitch tractors, Category II pin size, Category II width only.	9052	12 lbs.	$99
7270	Auger Adaptor Guard. Furnished with Model F8. Required on all machines with 2-9/16″ round spindle with 2-3/8″ diameter center column augers.	7270	8 lbs.	$34
9079	F8 Down Force Package. Complete with relief and automatic dump valve. Also fits Model 8700 Hydraulic Diggers. (less hoses)	9079	51 lbs.	$745
20050	Conversion Kit. Used to convert any Danuser PTO Digger with 622 casting number over to the 273 pinion. The kit includes a pinion, Pinion Guard, complete guarded driveline all the way to the tractor, and a 7270 Auger Adaptor Guard for 2-3/8″ diameter center column augers. This kit required on all diggers with serial numbers prior to 59,999.	20050	50 lbs.	$675
20060	Conversion kit. Used to convert any Danuser PTO Digger with a 622 casting number over to the 273 pinion. This kit includes a pinion, Pinion Guard, and all parts out through the center cross at the U-Joint on the gearbox, and a 7270 Auger Adapter Guard for 2-3/8″ diameter center column augers. This kit required on all diggers with serial numbers ranging from 60,001 to 71,199.	20060	18 lbs.	$418.75
PRICE DOES NOT INCLUDE SETUP OR SHIPPING – PRICED FOB FULTON, MISSOURI UPDATED 9/1/2018

G 20 / 40

Fits Category I, 3-point hitch, 20 to 40 HP
2″ round output spindle
Shear-pin protection
Completely guarded PTO driveline
Input and output safety guards

*G 20 / 40 SPECS*
AUGERS Diameter(inches)	4,6,9,12,14,16,18,24
Flight	Double
Depth(inches)	29,33,40
Extensions(inches)	7,14 (depending on tractor model)
Points	Standard, special & aggressive duty
Cutting Edges	Plain, serrated & Hole Digger Head
MOUNTING	ASAE CategoryI 3-point hitch mount
COMPONENTS Gear Set	Forged steel (3.1:1)
PTO Assembly (fully guarded)	540 RPM Weasler driveline
Bearings	Timken tapered roller
Seals	Dual-lip, spring-loaded
Spindle Size	2″ round
Boom (with reinforcing rib)	3″ O.D. tubing
Yoke	3″ O.D. tubing with CategoryIpins
WARRANTY(gearbox)	5 year

ITEM #	DESCRIPTION	PART #	WEIGHT	PRICE
G20/40	Digger, Max. diameter auger 24″	6000	217 lbs.	$1,975
6109	Yoke Extension Kit. Provides approximately 6″ of additional lift height to the digger. Amount of additional lift height will vary depending on the tractor make and model.	6109	5 lbs.	$87
6347	Adapter Kit – For John Deere 4110/4115 tractors. For Model G20/40	6347	7 lbs.	$143
20070	Guard Kit-Furnished as part of the J20/80 & G20/40 Digger. Gearboxes-Required on G20/40 Diggers Prior to S/N: 11,152	20070	25 lbs.	$112.50
6220	Down Force Package. Complete with relief and automatic dump valve. (less hoses) For Model G20/40	6220	57 lbs.	$660
6220 NOTE: Tractor must be equipped with remote outlets and either a three-way valve (as used in operation of a single-acting cylinder) or a four-way valve (as used in the operation of a double-acting cylinder). HOSES TO TRACTOR NOT SUPPLIED. (Need one hose to a pressurized outlet and one hose to the sump or reservoir).
PRICE DOES NOT INCLUDE SETUP OR SHIPPING – PRICED FOB FULTON, MISSOURI UPDATED 9/1/2015

J 20 / 80

Designed for Cat. I or II 3-pt. hitch tractors with 20-80 HP rating
Maximum Auger Diameter: 24″
Boom: 3-1/2″ O.D. tubing with reinforcing rib
Yoke: 3″ O.D. tubing
Bearings: Timken tapered roller bearings
Output Spindle: Guarded, 2″ round
Input Pinion: Guarded, 1-1/4″ diameter with roll pin to keep the u-joint attached with a Grade 5 shear bolt
Gearbox: Gear ratio of 3.1:1 with a heavy-duty gear set carrying a 5-year warranty

ITEM #	DESCRIPTION	PART #	WEIGHT	PRICE
J20/80	Digger-2″ round spindle, PTO driven (540 RPM), designed for most ASAE 3-pt. hitch Cat. I or II, 20 to 80 HP only tractors. Complete with Boom, Yoke, Auger Adaptor Guard, Gearbox, Driveline, and Hardware Package, Maximum diameter auger 24″ (Less Auger adn Accessories)	6800	260 lbs.	$2,300
6109	Yoke Extension Kit-Provides approximately 6″ of additional lift height to the digger. Amount of additional lift height will vary depending on the tractor make and model.	6109	5 lbs.	$87
6818	Down Force Package-Complete with relief and automatic dump valve. (Less Hoses)	6818	57 lbs.	$770
20070	Guard Kit-Furnished as part of the J20/80 & G20/40 Digger	20070	57 lbs.	$112.50
6818 NOTE: Tractor must be equipped with remote outlets and either a three-way valve (as used in operation of a single-acting cylinder) or a four-way valve (as used in the operation of a double-acting cylinder). HOSES TO TRACTOR NOT SUPPLIED. (Need one hose to a pressurized outlet and one hose to the sump or reservoir).
PRICE DOES NOT INCLUDE SETUP OR SHIPPING – PRICED FOB FULTON, MISSOURI UPDATED 9/1/2018

DANUSER AUGER ACCESSORIES

PART NUMBER	DESCRIPTION	SIZE	PRICE
AUGER EXTENSIONS WITH AUGER EXTENSION GUARDS
1849G*	Auger Extension— for 2-9/16″ round spindle diggers	7″	$187
7494G	Auger Extension— for 2-9/16″ round spindle diggers	14″	$164
7663G	Auger Extension— for 2-9/16″ round spindle diggers	21″	$195
9486G	Auger Extension— for 2-9/16″ round spindle diggers	48″	$299
9489G	Auger Extension— for 2-9/16″ round spindle diggers	72″	$368
6080G	Auger Extension— for 2″ round spindle diggers	7″	$101
6204G	Auger Extension— for 2″ round spindle diggers	14″	$134
6207G	Auger Extension— for 2″ round spindle diggers	21″	$154
9622G*	Auger Extension— for 2″ hex spindle diggers	7″	$257
9623G	Auger Extension— for 2″ hex spindle diggers	14″	$226
9624G	Auger Extension— for 2″ hex spindle diggers NOTE: On 24″, 30″, and 36″ augers the above extension will also serve as a 14″ extension.	21″	$268
9629G	Auger Extension— for 2″ hex spindle diggers NOTE: On 24″, 30″, and 36″ augers the above extension will also serve as a 28″, 35″, 42″, and 49″ extension.	56″	$411
9484G	Auger Extension— for 2″ hex spindle diggers	72″	$530
9855G	Auger Adapter— for 2-9/16″ round to 2″ hex	7″”	$225
9675G	Auger Adapter— for 2″ hex to 2 9/16″ round	7″	$272
* Includes a 7270 Auger Adapter Guard
AUGER EXTENSION GUARDS For Older Extensions Without Extension Guards
DA6269	Extension Guard— For use with 2″ round, 7″ extension	3 lbs.	21.25
DA6270	Extension Guard— For use with 2″ round, 14″ extension	6 lbs.	$23.75
DA6271	Extension Guard— For use with 2-9/16″ round & 2″ hex, 7″ extension	14 lbs.	$60
DA6272	Extension Guard— For use with 2-9/16″ round & 2″ hex, 14″ extensions & longer