Call Us
DANUSER EP SERIES DIGGERS Image

DANUSER EP SERIES DIGGERS

Call for Pricing

Price

Print
Call Us
Make:
Beaver Valley Supply
Model:
DANUSER EP SERIES DIGGERS
Category:
Baumalight Incisor - Skid Mount, Beaver Valley Supply, New
Danuser EP Series Drive Units
 
Economy Planetary Drive Unit Features:
•Lifetime warranty against output pull out (no snap rings)
•One-piece forged output and carrier assembly (no internal spline connection to fail)
•One-piece forged steel output housing (no casting to break)
•Utility-style housing with integrated ears makes it extremely strong
•Gearbox oil check and fill plugs are easily located (no disassembly required)
•No case drain required
•Extremely low maintenance
•Tapered roller bearings
•All rotating parts are completely sealed and running in oil
•Heavy-duty, high strength 1-1/4″ knuckle pins zinc plated to resist rust
•Robotically-welded housing
•Extremely tough powder coated housing
•Lifetime warranty covering output pull out!
•3 Year Warranty on drive unit
•2″ Hex Output
 
 
Model EP6
Maximum Auger Diameter 24″
Hydraulic Flow 6-15 GPM
Maximum Hydraulic Pressure 3,000 PSI
Gear Box Ratio 3.86:1
Speed
GPM RPM
6 36
8 48
10 60
12 73
14 85
15 91
TORQUE
PSI Ft.-Lbs.
2000 1014
2500 1267
3000 1520
Model EP10
Maximum Auger Diameter 30″
Hydraulic Flow 10-20 GPM
Maximum Hydraulic Pressure 3000 PSI
Gear Box Ratio 3.86:1
Speed
GPM RPM
10 48
12 58
14 68
16 77
18 87
20 97
TORQUE
PSI Ft.-Lbs.
2000 1270
2500 1587
3000 1904
Model EP15
Maximum Auger Diameter 36″
Hydraulic Flow 15-30 GPM
Maximum Hydraulic Pressure 3000 PSI
Gear Box Ratio 3.86:1
Speed
GPM RPM
15 49
18 59
20 65
24 78
28 92
30 98
TORQUE
PSI Ft.-Lbs.
2000 1874
2500 2342
3000 2811
Model EP20
Maximum Auger Diameter 36″
Hydraulic Flow 20-35 GPM
Maximum Hydraulic Pressure 3000 PSI
Gear Box Ratio 3.86:1
Speed
GPM RPM
20 50
22 55
26 65
30 75
32 80
35 87
TORQUE
PSI Ft.-Lbs.
2000 2465
2500 3081
3000 3697
MODEL DESCRIPTION WEIGHT PRICE
DA10180 Model EP6, 2″ Hex 138 lbs. $1,465
DA20180 Model EP6, 2-9/16″ Round 138 lbs. $1,465
DA10181 Model EP10, 2″ Hex 139 lbs. $1,575
DA20181 Model EP10, 2-9/16″ Round 139 lbs. $1,575
DA10182 Model EP15, 2″ Hex 140 lbs. $1,650
DA20182 Model EP15, 2-9/16″ Round 140 lbs. $1,650
DA20001 Model EP20, 2″ Hex 140 lbs. $1,780
DA20184 Model EP20, 2-9/16″ Round 140 lbs. $1,780
**Note: To make a complete unit must include: 1. Drive Unit, 2. Mount, 3. Hose Kit, 4. Auger**
Augers
Click Here for Danuser Augers
PRICE DOES NOT INCLUDE SETUP OR SHIPPING – PRICED FOB FACTORY
UPDATED 12/31/2018

Mount Options
 
 
  SKID-STEER QUICK ATTACH
Mounting Kit (includes Knuckle and Cradle) attaches Drive Unit to skid-steers with 2-pin system and SAE Standard quick couplers.
 
PART NUMBER
For EP Series: EP6, EP10, EP15, & EP20
10488
Approx. Ship Weight (lbs)
150 LBS.
 

 

 SKID-STEER QUICK ATTACH OFFSET PLATE W/HARDWARE
Mounting kit (includes knuckle and cradle) attaches drive unit to skid-steers or front-end loaders.
 
PART NUMBER
For EP Series: EP6, EP10, EP15, & EP20
20652
Approx. Ship Weight (lbs)
150 LBS.
 
  JD OFFSET QUICK ATTACH MOUNT FOR 200-500 SERIES LOADERS
Mounting kit (includes knuckle and cradle) attaches drive unit to front-end loaders with John Deere 200-500 quick attach system.
PART NUMBER
20659
Approx. Ship Weight (lbs)
166 LBS.
 
  EURO QUICK ATTACH OFFSET PLATE W/HARDWARE
Mounting kit (includes knuckle and cradle) attaches drive unit to front-end loaders with a euro quick attach system..
 
PART NUMBER
For EP Series: EP6, EP10, EP15, & EP20
20653
Approx. Ship Weight (lbs)
150 LBS.
  TLB (BACKHOE) & EXCAVATOR
Less dipperstick pin.
For dipperstick widths up to 13″.
Bucket pin diameters listed below.
BUCKET PIN DIAMETER
WEIGHT (lbs.)
PART NUMBER
1-5/8 inch
50
10296
1-3/4 inch
50
10231
45 mm
50
10481
50 mm
50
10232
55 mm
50
10233
  SMALLER BACKHOE
& MINI-EXCAVATOR
Up to 40 HP.
Less dipperstick pin.
For dipperstick widths from 3-1/2″ to 8″.
Bucket pin diameters listed below.
BUCKET PIN DIAMETER
WEIGHT (lbs.)
PART NUMBER
25 mm
42
10201
1 inch
42
10201
30 mm
42
10202
1-1/4 inch
42
10203
1-3/8 inch
42
10204
35 mm
42
10204
1-1/2 inch
42
10205
40 mm
42
10206
1-5/8 inch
42
10298
1-3/4 inch
46
10207
 
45 mm
46
10208
 
50 mm
 
46
10209
 
2 inch
46
10210
  BOLT-ON BUCKET
Mounting Kit (includes Knuckle) will mount on vertical surface. Kit does not include bucket mounting hardware.
(4 Bolts 1/2″ Diameter, Grade 5 or greater, 4 lock washers, and 4 nuts)
WEIGHT (lbs.)
PART NUMBER
40 LBS.
10489
MODEL DESCRIPTION WEIGHT PRICE
Skid-Steer Quick Attach
DA10488 Mounting Kit (includes Knuckle and Cradle) attaches Drive Unit to skid-steers with a 2-pin system For EP Series: EP6, EP10,EP15, EP20 150 lbs. $415
DA10488CSE Mounting Kit (includes Knuckle and Cradle) attaches Drive Units to skid-steers, Fits Case Models 1835B, 1835C, and 1840 For DIG Models: 615, 1025, 1530, 2035 150 lbs. $441
Offset Auger Mount
DA20652 Skid Steer Quick Attach Plate Offset w/hardware 150 lbs. $345
DA20653 Euro Quick Attach Offset w/hardware 87 lbs. $370
DA20659 John Deere 200-500 Offset w/hardware 166 lbs. $595
MODEL BUCKET PIN DIAM. WEIGHT PRICE
TLB (Backhoe) & Excavator
Less dipperstick pin, for dipperstick width up to 13″, bucket pin diameters listed below
DA10296 1-5/8 Inch 49 lbs. $400
DA10231 1-3/4 Inch 50 lbs. $400
DA10481 45 mm 50 lbs. $400
DA10232 50 mm 50 lbs. $400
DA10233 55 mm 50 lbs. $400
Smaller Backhoe & Mini-Excavator
Less dipperstick pin, for dipperstick widths from 3-1/2″ to 8″. Bucket pin diameters listed below.
DA10201mm 25 mm 42 lbs. $265
DA10201in 1 inch 42 lbs. $265
DA10202 30 mm 42 lbs. $265
DA10203 1-1/4 inch 42 lbs. $265
DA10204mm 35 mm 42 lbs. $265
DA10204in 1-3/8 inch 42 lbs. $265
DA10205 1-1/2 inch 42 lbs. $265
DA10206 40 mm 42 lbs. $265
DA10298 1-5/8 inch 42 lbs. $265
DA10207 1-3/4 inch 46 lbs. $265
DA10208 45 mm 46 lbs. $265
DA10209 50 mm 46 lbs. $265
DA10210 2 inch 46 lbs. $265
Quick-Attach Mounting Kits
DA10172 For Cat 42D & 420E 75 lbs. $688
DA10173 For JCB 208S, 803, & 8018 40 lbs. $572
DA10174 For JD 790ELC 172 lbs. $1,067
DA10175 For JD 135C RTS 82 lbs. $658
DA20200 JD 35D Mini-Ex (Wedge) 60 lbs. $428
DA20201 JD50D Mini-Ex (Wedge) 60 lbs. $428
DA20210 For Yanmar VIO40/45/50/55 (quick coupler) 43 lbs. $579
DA10176 For Yanmar VIO20 (quick coupler) 45 lbs. $569
DA10177 For Yanmar VIO27/35 (quick coupler) 50 lbs. $579
DA20007 For Kubota KX161-3 & U45 60 lbs. $428
DA20008 For Kubota KX121 60 lbs. $428
DA20026 Kubota KX057 & V55 60 lbs. $428
DA20037 Kubota U25 60 lbs. $428
DA20075 Kubota KX141-3 & U15 60 lbs. $428
DA20042 Komatsu PC50MR-2 50 lbs. $428
DA20202 Bobcat X-Change 55 lbs. $479
DA20258 TAKEUCHI with TAG Style Quick Couplers TB0 35/135/138/175/180/235/240/280/285/290 43 lbs. $762
DA172918 TAG Pin Grabber Style Quick Coupler 61 lbs. $579
Bolt-On Bucket
DA10489 Mounting kit (includes knuckle) will mount on vertical surface. Kit does not include bucket mounting hardware 40 lbs. $260
**Note: To make a complete unit must include: 1. Drive Unit, 2. Mount, 3. Hose Kit, 4. Auger**
Augers
Click Here for Danuser Augers
PRICE DOES NOT INCLUDE SETUP OR SHIPPING – PRICED FOB FACTORY
UPDATED 12/31/2018

Hoses & Couplers
  HOSES
Hoses are 96″ long with abrasion sleeves.
3/4″ hoses REQUIRED for 20 GPM to 45 GPM.

If the drive unit is mounted 10 feet or more from the hydraulic outlets on your unit, or the pump delivers 20 GPM or more, hose size should be increased to 3/4 inch inside diameter.
DESCRIPTION
WEIGHT (lbs.)
PART NUMBER
1/2″ HOSE KIT with flat face ISO couplers
14
10050
 
3/4″ HOSE KIT with flat face ISO couplers
19
10051
 
Note: Couplers will not fit Case 1835C, 1838, 1840, & 1845C
Skid-Steers.
1/2″ HOSE KIT (includes fittings NOT couplers)

 
 9 10043
3/4″ HOSE KIT (includes fittings NOT couplers)
14
10044
Kit includes 2-1/2″ ID hoses 25′ long, 2 pioneer couplers, male & female flat face couplers, and hose clamp bracket

 
 18 21231
 
MODEL DESCRIPTION WEIGHT PRICE
DA10047 Cross Port Relief Valve (req’d for pressures exceeding 3000 PSI) lbs. $345
DA10050 1/2″ HOSE KIT with flat face ISO couplers 14 lbs. $213
DA10051 3/4″ HOSE KIT with flat face ISO couplers 19 lbs. $295
DA10043 1/2″ HOSE KIT (includes fittings NOT couplers) 9 lbs. $140
DA10044 3/4″ HOSE KIT (includes fittings NOT couplers) 14 lbs. $222
DA21231 Front-end loader 1/2″ HOSE KIT – Kit includes 2-1/2″ ID hoses 25′ long, 2 pioneer couplers, male and female flat face couplers, and hose clamp bracket.
**Note: Must Order DA10050 To Complete Kit**		 18 lbs. $345
DA21350 Front End Loader 3/4″ Hose Kit 25′ long w/flat face ISO couplers and pioneer couplers, mounting bracket included, hardware NOT included
**Note: Must Order DA10050 or DA10051 To Complete Kit**		 lbs. $474
Flat Face Couplers
DA10048 Male Hydraulic Coupler 1/2″ ‘O’ Ring Boss(7/8 x 14) lbs. $36
DA10049 Female Hydraulic Coupler 1/2″ ‘O’ Ring Boss(7/8 x 14) lbs. $58
**Note: To make a complete unit must include: 1. Drive Unit, 2. Mount, 3. Hose Kit, 4. Auger**
Augers
Click Here for Danuser Augers
PRICE DOES NOT INCLUDE SETUP OR SHIPPING – PRICED FOB FACTORY
UPDATED 12/31/2018

Similar Products

WESTFIELD WCX TRANSFER & PITSTOP CONVEYORS Image

WESTFIELD WCX TRANSFER & PITSTOP CONVEYORS

Call for Pricing
WCX1515 Transfer Conveyor Specifications: ...
Details
WESTFIELD MKX 160 SERIES GRAIN AUGERS Image

WESTFIELD MKX 160 SERIES GRAIN AUGERS

Call for Pricing
Introducing the NEW MKX 16" Auger, available in 85′, 105′ ...
Details
LUNDELL POLY CUPPED FLIGHTING AUGER Image

LUNDELL POLY CUPPED FLIGHTING AUGER

Call for Pricing
• Cup design available in 5 in., 6 in., and 7 in. ...
Details
HACKETT RANGER 5/8″ HARROWS Image

HACKETT RANGER 5/8″ HARROWS

Call for Pricing
Ranger Harrows •Pasture renovation, by break...
Details
H & S Grinder Mixer Image

H & S Grinder Mixer

Call for Pricing
THE H & S Grinder Mixer ADDITIONAL OPTIONS AVA...
Details
DANUSER PYTHON WIRE ROLLER/UNROLLER Image

DANUSER PYTHON WIRE ROLLER/UNROLLER

Call for Pricing
Python Wire Winder Features: ...
Details
BISON BOX SCRAPERS Image

BISON BOX SCRAPERS

Call for Pricing
THIS DATA DUPLICATED F...
Details
BISON MULTIFUNCTIONAL CULTIVATOR Image

BISON MULTIFUNCTIONAL CULTIVATOR

Call for Pricing
Bison Cultivator IT...
Details